******************* This email originates from outside Imperial. Do not click on links and attachments unless you recognise the sender. If you trust the sender, add them to your safe senders list https://spam.ic.ac.uk/SpamConsole/Senders.aspx to disable email stamping for this address. ******************* Hi Guys. At the moment, I have generated my quadrilateral meshes with gmesh. Are there other options? Is it possible to convert the quadrilateral meshes generated by ICEM CFD for example? I am trying to better control the quadrilateral mesh generation. Gmesh is starting to turn into an annoying experience. Thank you very much. Alessandro
Hi Alessandro- You may want to look into Sandia National Lab's CUBIT package https://cubit.sandia.gov/tutorials/ <https://signal3domain.com/click?redirect=https%3A%2F%2Fcubit.sandia.gov%2Ftutorials%2F&dID=1645408422971&linkName=https://cubit.sandia.gov/tutorials/> That might be relatively easier to use than GMSH. Best, Raj On Sun, Feb 20, 2022 at 8:57 AM Alessandro Alberto de Lima <aalima@usp.br> wrote:
This email from aalima@usp.br originates from outside Imperial. Do not click on links and attachments unless you recognise the sender. If you trust the sender, add them to your safe senders list <https://signal3domain.com/click?redirect=https%3A%2F%2Fspam.ic.ac.uk%2FSpamC... senders list> to disable email stamping for this address.
Hi Guys. At the moment, I have generated my quadrilateral meshes with gmesh. Are there other options? Is it possible to convert the quadrilateral meshes generated by ICEM CFD for example? I am trying to better control the quadrilateral mesh generation. Gmesh is starting to turn into an annoying experience. Thank you very much.
Alessandro _______________________________________________ Nektar-users mailing list Nektar-users@imperial.ac.uk https://mailman.ic.ac.uk/mailman/listinfo/nektar-users <https://signal3domain.com/click?redirect=https%3A%2F%2Fmailman.ic.ac.uk%2Fmailman%2Flistinfo%2Fnektar-users&dID=1645408422971&linkName=https://mailman.ic.ac.uk/mailman/listinfo/nektar-users>
Thank you very much. I'll check it out. Alessandro On Sun, Feb 20, 2022 at 10:53 PM Shukla, Khemraj <khemraj_shukla@brown.edu> wrote:
Hi Alessandro- You may want to look into Sandia National Lab's CUBIT package https://cubit.sandia.gov/tutorials/ <https://signal3domain.com/click?redirect=https%3A%2F%2Fcubit.sandia.gov%2Ftutorials%2F&dID=1645408422971&linkName=https://cubit.sandia.gov/tutorials/> That might be relatively easier to use than GMSH.
Best, Raj
On Sun, Feb 20, 2022 at 8:57 AM Alessandro Alberto de Lima <aalima@usp.br> wrote:
This email from aalima@usp.br originates from outside Imperial. Do not click on links and attachments unless you recognise the sender. If you trust the sender, add them to your safe senders list <https://signal3domain.com/click?redirect=https%3A%2F%2Fspam.ic.ac.uk%2FSpamConsole%2FSenders.aspx&dID=1645408422971&linkName=safe%20senders%20%0D%20%20%20%20%20%20list> to disable email stamping for this address.
Hi Guys. At the moment, I have generated my quadrilateral meshes with gmesh. Are there other options? Is it possible to convert the quadrilateral meshes generated by ICEM CFD for example? I am trying to better control the quadrilateral mesh generation. Gmesh is starting to turn into an annoying experience. Thank you very much.
Alessandro _______________________________________________ Nektar-users mailing list Nektar-users@imperial.ac.uk https://mailman.ic.ac.uk/mailman/listinfo/nektar-users <https://signal3domain.com/click?redirect=https%3A%2F%2Fmailman.ic.ac.uk%2Fmailman%2Flistinfo%2Fnektar-users&dID=1645408422971&linkName=https://mailman.ic.ac.uk/mailman/listinfo/nektar-users>
Hi Alessandro, We have just posted a blog on converting from point wise to our format. Actually in this case we just use the gmsh output format. So this might be a possibility from other converters too. Cheers, Spencer. On 21 Feb 2022, at 01:53, Shukla, Khemraj <khemraj_shukla@brown.edu<mailto:khemraj_shukla@brown.edu>> wrote: Hi Alessandro- You may want to look into Sandia National Lab's CUBIT package https://cubit.sandia.gov/tutorials/<https://signal3domain.com/click?redirect=https%3A%2F%2Fcubit.sandia.gov%2Ftutorials%2F&dID=1645408422971&linkName=https://cubit.sandia.gov/tutorials/> That might be relatively easier to use than GMSH. Best, Raj On Sun, Feb 20, 2022 at 8:57 AM Alessandro Alberto de Lima <aalima@usp.br<mailto:aalima@usp.br>> wrote: This email from aalima@usp.br<mailto:aalima@usp.br> originates from outside Imperial. Do not click on links and attachments unless you recognise the sender. If you trust the sender, add them to your safe senders list<https://signal3domain.com/click?redirect=https%3A%2F%2Fspam.ic.ac.uk%2FSpamConsole%2FSenders.aspx&dID=1645408422971&linkName=safe%20senders%20%20%20%20%20%20%20list> to disable email stamping for this address. Hi Guys. At the moment, I have generated my quadrilateral meshes with gmesh. Are there other options? Is it possible to convert the quadrilateral meshes generated by ICEM CFD for example? I am trying to better control the quadrilateral mesh generation. Gmesh is starting to turn into an annoying experience. Thank you very much. Alessandro _______________________________________________ Nektar-users mailing list Nektar-users@imperial.ac.uk<mailto:Nektar-users@imperial.ac.uk> https://mailman.ic.ac.uk/mailman/listinfo/nektar-users<https://signal3domain.com/click?redirect=https%3A%2F%2Fmailman.ic.ac.uk%2Fmailman%2Flistinfo%2Fnektar-users&dID=1645408422971&linkName=https://mailman.ic.ac.uk/mailman/listinfo/nektar-users> _______________________________________________ Nektar-users mailing list Nektar-users@imperial.ac.uk<mailto:Nektar-users@imperial.ac.uk> https://mailman.ic.ac.uk/mailman/listinfo/nektar-users
Hi Alessandro, Zhaoyu kindly provided an instruction on how to convert the ICEM mesh to Nektar++ mesh. I translated it and posted a blog. Cheers Ankang ________________________________ From: nektar-users-bounces@imperial.ac.uk <nektar-users-bounces@imperial.ac.uk> on behalf of Sherwin, Spencer J <s.sherwin@imperial.ac.uk> Sent: 21 February 2022 19:15 To: Shukla, Khemraj <khemraj_shukla@brown.edu> Cc: nektar-users <nektar-users@imperial.ac.uk> Subject: Re: [Nektar-users] 2D mesh generation Hi Alessandro, We have just posted a blog on converting from point wise to our format. Actually in this case we just use the gmsh output format. So this might be a possibility from other converters too. Cheers, Spencer. On 21 Feb 2022, at 01:53, Shukla, Khemraj <khemraj_shukla@brown.edu<mailto:khemraj_shukla@brown.edu>> wrote: Hi Alessandro- You may want to look into Sandia National Lab's CUBIT package https://cubit.sandia.gov/tutorials/<https://signal3domain.com/click?redirect=https%3A%2F%2Fcubit.sandia.gov%2Ftutorials%2F&dID=1645408422971&linkName=https://cubit.sandia.gov/tutorials/> That might be relatively easier to use than GMSH. Best, Raj On Sun, Feb 20, 2022 at 8:57 AM Alessandro Alberto de Lima <aalima@usp.br<mailto:aalima@usp.br>> wrote: This email from aalima@usp.br<mailto:aalima@usp.br> originates from outside Imperial. Do not click on links and attachments unless you recognise the sender. If you trust the sender, add them to your safe senders list<https://signal3domain.com/click?redirect=https%3A%2F%2Fspam.ic.ac.uk%2FSpamConsole%2FSenders.aspx&dID=1645408422971&linkName=safe%20senders%20%20%20%20%20%20%20list> to disable email stamping for this address. Hi Guys. At the moment, I have generated my quadrilateral meshes with gmesh. Are there other options? Is it possible to convert the quadrilateral meshes generated by ICEM CFD for example? I am trying to better control the quadrilateral mesh generation. Gmesh is starting to turn into an annoying experience. Thank you very much. Alessandro _______________________________________________ Nektar-users mailing list Nektar-users@imperial.ac.uk<mailto:Nektar-users@imperial.ac.uk> https://mailman.ic.ac.uk/mailman/listinfo/nektar-users<https://signal3domain.com/click?redirect=https%3A%2F%2Fmailman.ic.ac.uk%2Fmailman%2Flistinfo%2Fnektar-users&dID=1645408422971&linkName=https://mailman.ic.ac.uk/mailman/listinfo/nektar-users> _______________________________________________ Nektar-users mailing list Nektar-users@imperial.ac.uk<mailto:Nektar-users@imperial.ac.uk> https://mailman.ic.ac.uk/mailman/listinfo/nektar-users
participants (4)
-
Alessandro Alberto de Lima
-
Gao, Ankang
-
Sherwin, Spencer J
-
Shukla, Khemraj