ctest fails when compiling nektar++-4.2.0
Hello All, I am trying to compile the nektar++-4.2.0 on a Linux machine. When I run the ctest at the end, all the tests fail. I have also tried to use the info from the FAQ's in the userguide4.2.0, but it didn't help. Any help to resolve this issue will be greatly appreciated. Thank you, Manish Sharma
Hi Manish, We'll need a few more details in order to assist you. Can you run ctest --output-on-failure and forward a sample of the error messages you're getting? Thanks, Dave On 23 Sep 2015, at 19:05, Sharma, Manish (sharmamh) <sharmamh@mail.uc.edu> wrote:
Hello All,
I am trying to compile the nektar++-4.2.0 on a Linux machine. When I run the ctest at the end, all the tests fail. I have also tried to use the info from the FAQ’s in the userguide4.2.0, but it didn’t help.
Any help to resolve this issue will be greatly appreciated.
Thank you,
Manish Sharma
_______________________________________________ Nektar-users mailing list Nektar-users@imperial.ac.uk https://mailman.ic.ac.uk/mailman/listinfo/nektar-users
-- David Moxey (Research Associate) d.moxey@imperial.ac.uk | www.imperial.ac.uk/people/d.moxey Room 363, Department of Aeronautics, Imperial College London, London, SW7 2AZ, UK.
Hi All, I want to output the history points of a 3D1H simulation using the parameter OutputPlane . But I found only the result at z=-1 (OutputPlane=0) is correct, while the values at other points are much smaller than what they should be. I have already updated to version 4.2.0. Has anyone encoutered the same problem? Thank you for any suggestion! Best regards, Chengwang Xiong From: David Moxey Date: 2015-09-24 18:19 To: Sharma, Manish (sharmamh) CC: nektar-users@imperial.ac.uk Subject: Re: [Nektar-users] ctest fails when compiling nektar++-4.2.0 Hi Manish, We'll need a few more details in order to assist you. Can you run ctest --output-on-failure and forward a sample of the error messages you're getting? Thanks, Dave On 23 Sep 2015, at 19:05, Sharma, Manish (sharmamh) <sharmamh@mail.uc.edu> wrote:
Hello All,
I am trying to compile the nektar++-4.2.0 on a Linux machine. When I run the ctest at the end, all the tests fail. I have also tried to use the info from the FAQ’s in the userguide4.2.0, but it didn’t help.
Any help to resolve this issue will be greatly appreciated.
Thank you,
Manish Sharma
_______________________________________________ Nektar-users mailing list Nektar-users@imperial.ac.uk https://mailman.ic.ac.uk/mailman/listinfo/nektar-users
-- David Moxey (Research Associate) d.moxey@imperial.ac.uk | www.imperial.ac.uk/people/d.moxey Room 363, Department of Aeronautics, Imperial College London, London, SW7 2AZ, UK. _______________________________________________ Nektar-users mailing list Nektar-users@imperial.ac.uk https://mailman.ic.ac.uk/mailman/listinfo/nektar-users
Hi I wonder if it might be outputting the Fourier coefficient on the plane rather than the physical value. Douglas is this something you can help Chengwang with? Thanks Spencer Sent from my iPhone On 24 Sep 2015, at 17:15, Chengwang Xiong <21358955@student.uwa.edu.au<mailto:21358955@student.uwa.edu.au>> wrote: Hi All, I want to output the history points of a 3D1H simulation using the parameter OutputPlane . But I found only the result at z=-1 (OutputPlane=0) is correct, while the values at other points are much smaller than what they should be. I have already updated to version 4.2.0. Has anyone encoutered the same problem? Thank you for any suggestion! ________________________________ Best regards, Chengwang Xiong From: David Moxey<mailto:d.moxey@imperial.ac.uk> Date: 2015-09-24 18:19 To: Sharma, Manish (sharmamh)<mailto:sharmamh@mail.uc.edu> CC: nektar-users@imperial.ac.uk<mailto:nektar-users@imperial.ac.uk> Subject: Re: [Nektar-users] ctest fails when compiling nektar++-4.2.0 Hi Manish, We'll need a few more details in order to assist you. Can you run ctest --output-on-failure and forward a sample of the error messages you're getting? Thanks, Dave On 23 Sep 2015, at 19:05, Sharma, Manish (sharmamh) <sharmamh@mail.uc.edu<mailto:sharmamh@mail.uc.edu>> wrote:
Hello All,
I am trying to compile the nektar++-4.2.0 on a Linux machine. When I run the ctest at the end, all the tests fail. I have also tried to use the info from the FAQ’s in the userguide4.2.0, but it didn’t help.
Any help to resolve this issue will be greatly appreciated.
Thank you,
Manish Sharma
_______________________________________________ Nektar-users mailing list Nektar-users@imperial.ac.uk<mailto:Nektar-users@imperial.ac.uk> https://mailman.ic.ac.uk/mailman/listinfo/nektar-users
-- David Moxey (Research Associate) d.moxey@imperial.ac.uk<mailto:d.moxey@imperial.ac.uk> | www.imperial.ac.uk/people/d.moxey<http://www.imperial.ac.uk/people/d.moxey> Room 363, Department of Aeronautics, Imperial College London, London, SW7 2AZ, UK. _______________________________________________ Nektar-users mailing list Nektar-users@imperial.ac.uk<mailto:Nektar-users@imperial.ac.uk> https://mailman.ic.ac.uk/mailman/listinfo/nektar-users _______________________________________________ Nektar-users mailing list Nektar-users@imperial.ac.uk<mailto:Nektar-users@imperial.ac.uk> https://mailman.ic.ac.uk/mailman/listinfo/nektar-users
Hi Dave, Thank you for your quick response. I ran the "ctest --output-on-failure" command and here is the sample of error messages: Start 361: CompressibleFlowSolver_CylinderSubsonic_NS_FRHU_LFRHU_SEM_3DHOMO1D_FFT 361/379 Test #361: CompressibleFlowSolver_CylinderSubsonic_NS_FRHU_LFRHU_SEM_3DHOMO1D_FFT ............***Failed 0.01 sec Error occurred running test: Command: CompressibleFlowSolver-g CylinderSubsonic_NS_FRHU_LFRHU_SEM_3DHOMO1D_FFT.xml 1>output.out 2>output.err Files left in /home/manishsharma915/nektar++-4.2.0/build/solvers/CompressibleFlowSolver/tmp_CylinderSubsonic_NS_FRHU_LFRHU_SEM_3DHOMO1D_FFT Start 362: CompressibleFlowSolver_IsentropicVortex16_FRHU_SEM_3DHOMO1D_FFT 362/379 Test #362: CompressibleFlowSolver_IsentropicVortex16_FRHU_SEM_3DHOMO1D_FFT ...................***Failed 0.02 sec Error occurred running test: Command: CompressibleFlowSolver-g IsentropicVortex16_FRHU_SEM_3DHOMO1D_FFT.xml 1>output.out 2>output.err Files left in /home/manishsharma915/nektar++-4.2.0/build/solvers/CompressibleFlowSolver/tmp_IsentropicVortex16_FRHU_SEM_3DHOMO1D_FFT Start 363: CompressibleFlowSolver_Couette_FRSD_LFRSD_MODIFIED_3DHOMO1D_FFT 363/379 Test #363: CompressibleFlowSolver_Couette_FRSD_LFRSD_MODIFIED_3DHOMO1D_FFT ...................***Failed 0.01 sec Error occurred running test: Command: CompressibleFlowSolver-g Couette_FRSD_LFRSD_MODIFIED_3DHOMO1D_FFT.xml 1>output.out 2>output.err Files left in /home/manishsharma915/nektar++-4.2.0/build/solvers/CompressibleFlowSolver/tmp_Couette_FRSD_LFRSD_MODIFIED_3DHOMO1D_FFT Start 364: CompressibleFlowSolver_CylinderSubsonic_NS_FRSD_LFRSD_MODIFIED_3DHOMO1D_FFT 364/379 Test #364: CompressibleFlowSolver_CylinderSubsonic_NS_FRSD_LFRSD_MODIFIED_3DHOMO1D_FFT .......***Failed 0.02 sec Error occurred running test: Command: CompressibleFlowSolver-g CylinderSubsonic_NS_FRSD_LFRSD_MODIFIED_3DHOMO1D_FFT.xml 1>output.out 2>output.err Files left in /home/manishsharma915/nektar++-4.2.0/build/solvers/CompressibleFlowSolver/tmp_CylinderSubsonic_NS_FRSD_LFRSD_MODIFIED_3DHOMO1D_FFT Also, even though the ctest is failing, I am able to use the code (at least to convert mesh files for now, will have check on the solver). Thanks, Manish ________________________________________ From: David Moxey <d.moxey@imperial.ac.uk> Sent: Thursday, September 24, 2015 6:19 AM To: Sharma, Manish (sharmamh) Cc: nektar-users@imperial.ac.uk Subject: Re: [Nektar-users] ctest fails when compiling nektar++-4.2.0 Hi Manish, We'll need a few more details in order to assist you. Can you run ctest --output-on-failure and forward a sample of the error messages you're getting? Thanks, Dave On 23 Sep 2015, at 19:05, Sharma, Manish (sharmamh) <sharmamh@mail.uc.edu> wrote:
Hello All,
I am trying to compile the nektar++-4.2.0 on a Linux machine. When I run the ctest at the end, all the tests fail. I have also tried to use the info from the FAQ's in the userguide4.2.0, but it didn't help.
Any help to resolve this issue will be greatly appreciated.
Thank you,
Manish Sharma
_______________________________________________ Nektar-users mailing list Nektar-users@imperial.ac.uk https://mailman.ic.ac.uk/mailman/listinfo/nektar-users
-- David Moxey (Research Associate) d.moxey@imperial.ac.uk | www.imperial.ac.uk/people/d.moxey Room 363, Department of Aeronautics, Imperial College London, London, SW7 2AZ, UK.
participants (4)
-
Chengwang Xiong
-
David Moxey
-
Sharma, Manish (sharmamh)
-
Sherwin, Spencer J