******************* This email originates from outside Imperial. Do not click on links and attachments unless you recognise the sender. If you trust the sender, add them to your safe senders list https://spam.ic.ac.uk/SpamConsole/Senders.aspx to disable email stamping for this address. ******************* Hi all, I have a linear multiblock structured mesh generated in Icem Hexa and I would like to know if NekMesh could be used to curve external linear meshes. Thanks a lot and looking forward to hearing from you. Cheers, Andrei Not Subject to Export Control This information is provided by Rolls-Royce in good faith based upon the latest information available to it; no warranty or representation is given; no contractual or other binding commitment is implied. (c) 2021 Rolls-Royce The data contained in, or attached to, this e-mail, may contain confidential information. If you have received it in error you should notify the sender immediately by reply e-mail, delete the message from your system and contact +44 (0) 3301235850 (Security Operations Centre) if you need assistance. Please do not copy it for any purpose, or disclose its contents to any other person. An e-mail response to this address may be subject to interception or monitoring for operational reasons or for lawful business practices. (c) 2021 Rolls-Royce plc Registered office: Kings Place, 3rd Floor 90 York Way, London, N1 9FX Company number: 1003142. Registered in England
Hi Andrei, I have in the past curved linear meshes using NekMesh's utility called Spherigons (the user guide has a section on it). My process was as follows: export the linear mesh in gmsh format, then convert to Nektar format and finally curve using Spherigons. Possibly you can skip the second step and keep the curved mesh gmsh format.I have seen the cgns format also being used but I haven't tried it myself. --- *Vishal SAINI* On Thu, Jan 28, 2021 at 2:02 PM Cimpoeru, Ionut Andrei < IonutAndrei.Cimpoeru@rolls-royce.com> wrote:
This email from IonutAndrei.Cimpoeru@Rolls-Royce.com originates from outside Imperial. Do not click on links and attachments unless you recognise the sender. If you trust the sender, add them to your safe senders list <https://spam.ic.ac.uk/SpamConsole/Senders.aspx> to disable email stamping for this address.
Hi all,
I have a linear multiblock structured mesh generated in Icem Hexa and I would like to know if NekMesh could be used to curve external linear meshes. Thanks a lot and looking forward to hearing from you.
Cheers, Andrei
Not Subject to Export Control
This information is provided by Rolls-Royce in good faith based upon the latest information available to it; no warranty or representation is given; no contractual or other binding commitment is implied.
© 2021 Rolls-Royce
The data contained in, or attached to, this e-mail, may contain confidential information. If you have received it in error you should notify the sender immediately by reply e-mail, delete the message from your system and contact +44 (0) 3301235850 (Security Operations Centre) if you need assistance. Please do not copy it for any purpose, or disclose its contents to any other person.
An e-mail response to this address may be subject to interception or monitoring for operational reasons or for lawful business practices.
(c) 2021 Rolls-Royce plc
Registered office: Kings Place, 3rd Floor 90 York Way, London, N1 9FX Company number: 1003142. Registered in England _______________________________________________ Nektar-users mailing list Nektar-users@imperial.ac.uk https://mailman.ic.ac.uk/mailman/listinfo/nektar-users
participants (2)
-
Cimpoeru, Ionut Andrei
-
Vishal Saini