[Nektar-users] Hi All (( can i use two different Reynolds in the same case ))

13 Dec 2018


      Hi All,
I need to use two different Reynolds in the same case as two velocity
inputs, my case is incompressible case, if I defined rho and Kinematic
viscosity and change inlet speeds is it ok like OpenFoam and does not
define Re like this:


 <!--   <P> Re            = 150                 </P>   -->        <!--
commented -->
          <P> rhoInf        = 1.2041           </P>                <!-- air
density at 20 c -->
          <P> Kinvis        = 0.000015111  </P>

--------
 <REGION REF="0">        <!-- Inlet_upper  -->
        <D VAR="u" VALUE="0.00226665" />                   <!-- Re 150 R
-->
        <D VAR="v" VALUE="0" />
        <N VAR="p" USERDEFINEDTYPE="H" VALUE="0"/>
      </REGION>

      <REGION REF="1">        <!-- Inlet_lower  -->
        <D VAR="u" VALUE="0.000846216" />                  <!-- Re 56 R  -->
        <D VAR="v" VALUE="0" />
        <N VAR="p" USERDEFINEDTYPE="H" VALUE="0"/>
      </REGION>
-----------------------

and calculate real two velocities and put it in the inlet speeds, is this ok
Regards,

[Nektar-users] Hi All (( can i use two different Reynolds in the same case ))

Moto Light