Hi all,

I am guessing this is down to us using ExtractTracePhys() inside the boundary condition functions? I thought this had been patched out but it seems not.

Cheers,

Dave

> On 6 Jul 2016, at 20:25, Mengaldo, Gianmarco <g.mengaldo11@imperial.ac.uk> wrote:
>
> Hi guys,
>
> Yes, this is a known issue that we are trying to fix permanently!
>
> We have a temporary fix for it at the moment. Rodrigo should be able to help.
>
> Regards,
> Gianmarco
>
>
> Sent from my Samsung device
>
>
> -------- Original message --------
> From: Amitvikram Dutta <amitvdutta23@gmail.com>
> Date: 06/07/2016 19:22 (GMT+00:00)
> To: "Moura, Rodrigo C" <r.moura13@imperial.ac.uk>, "Selbach, Fabian" <fabian.selbach@student.uni-siegen.de>
> Cc: nektar-users <nektar-users@imperial.ac.uk>
> Subject: Re: [Nektar-users] Problem 3D CompressibleFlowSolver
>
> Hi,
>
> I've been having an identical problem and would appreciate knowledge of the bypass
>
>
> On Wed, Jul 6, 2016, 11:20 AM Rodrigo Moura <r.moura13@imperial.ac.uk> wrote:
> Hello Fabian,
>
> This might be an issue related to parallelization due to some recent modifications in the master or release branches. Does your case run in serial? If it runs, I can show you how to bypass this problem and run in parallel before an official fix is done.
>
> Cheers,
> Rodrigo
> .
> _______________________________________________
> Nektar-users mailing list
> Nektar-users@imperial.ac.uk
> https://mailman.ic.ac.uk/mailman/listinfo/nektar-users
> --
> Amitvikram Dutta
> MASc Candidate
> Graduate Research Assistant
> Okanagan CFD Laboratory
> University of British Columbia | Okanagan Campus
> _______________________________________________
> Nektar-users mailing list
> Nektar-users@imperial.ac.uk
> https://mailman.ic.ac.uk/mailman/listinfo/nektar-users



--
David Moxey (Research and Teaching Fellow)
d.moxey@imperial.ac.uk | www.imperial.ac.uk/people/d.moxey

Room 364, Department of Aeronautics,
Imperial College London,
London, SW7 2AZ, UK.